C20

13.2 ft

Wingspan

23 ft/s

Max speed

0.04 mm

Repeatability
play icon imageplay icon image
BTS
BTS

The Most Versatile Cinema robot Ever

The C20 is the best balance of reach, speed, and portability out of any robot on the market, giving you the best bang for your buck. Whether you're using it for table top in your studio or with track on location, you can count on the C20 to get the shot you need.

With SISU Lab's fast and intuitive interface, programming your shot doesn't get any easier. Instead of spending hours on a shot, SISU Lab makes it simple to program and perfect your camera move in a matter of minutes. Not only does this mean more shots per hour, but it opens up new worlds of possibilities for creators that were previously unreachable without extensive knowledge and training.

Hardware

FIZ Motors

We know your job depends on the tools you use. That's why we include two ARRI cmotion lens motors with every robot.

Camera Mount

We provide a universal dovetail mount with a custom cheeseplate to mount to your robot. Also see the OmniBracket.

Combo Cable

Easy access at the end of the arm to camera power, FIZ power and comms, SDI, start-stop, and bloop light connections.

Industrial Servo Motors

Precision is everything when it comes to moco. Our C20 arm is repeatable to 0.04mm - that's half the width of a human hair.

Modular Track

We have designed the fastest track in the industry. And it's modular, so you can make it as long as you want!

FAST AND EASY

We've made programming a robot so intuitive we hesitate to even call it "programming". Squeeze the trigger, move your hand, and the camera will follow your exact movement. Or you can just drive it into position with the joystick. Once you're there, just press a button to save the keyframe to your timeline and voilà, you're ready for the next one.

SISU C11 camera robot with entire system

Safety

We take safety seriously.

E-stop Buttons

Each system comes with two permanent and two optional emergency stop buttons for max safety.

Enable Switch

If this three-position button is not held down, the robot will not move. Prevents dangerous accidental robot moves.

Mastering Switch

During setup, optionally use this to ensure the robot is actually exactly where it thinks it is.

Mode Switch

Switch between programming mode (safety-speed limited) and run mode (full-speed).

Watchdog

In programming mode, redundant processors monitor robot speeds in real-time and perform a safety stop if it tries to go too fast.

C20 Specs

Imperial
Metric

Metric Dimensions

Max height

11' 2"

2.5m

Lowest position

-1' 5"

0.03m

Max reach from center

6' 7"

1.44m

pedestal footprint

28" x 31"

0.7m x 0.8m

Repeatability

Robot Repeatability

0.0016"

0.04mm

Robot Speeds

max linear move

6.6 ft/s

2m/s

max overall speed

23 ft/s

5.4m/s

Environmental

min temperature

40 °F

4 °C

Max temperature

113 °F

45 °C

robot arm ingress

IP65

IP65

robot wrist ingress

IP65

IP65

WEIGHT

Robot

1070 lb

379 kg

rated payload

35 lb

10 kg

max payload

42 lb

14.5 kg

controls cabinet

400 lb

100 kg

additional weights

880 lb

400 kg

Power

max power

8kVA

8kVA

Voltage*

400-480VAC 3Φ

400-480VAC 3Φ

Max current

10A

10A

Power cable

23 ft

7m

Robot to cabinet cable

23 ft OR 49 ft

7m OR 15m

plug type

SCM420P7W

SCM420P7W

compatible Oulets

IEC60309

IEC60309

*Additional power options available.  Check out our Battery Box.

Contact us

I'm interested in:

By providing my contact information, I acknowledge and give my explicit consent to be contacted via SMS. Message and data rates may apply. Message frequency may vary. Reply STOP to opt out.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Contact Us